GTIN (JAN code): DXP_CS1_QE2 / DXP_CS1_QE3
This is a sensor device that adds hand tracking functionality to the Meta Quest2/3/3S controller. It is possible to achieve hand tracking equal to or better than that of the Valve Index controller.
*To avoid any misunderstanding regarding product specifications, please read all of the following explanation before purchasing.
※The Meta Quest Pro version has been removed from the lineup as the supplier has discontinued strap production. (Updated on February 10, 2025)
Contents
- Knuckle straps for Quest2 or 3 or 3S controllers (for both hands)
- ContactSheet (for both hands)
- Communication dongle (1 piece)
- Type-C USB cable (2 pcs)
- Silicone band for fixing
- Replacement Tape
*You can choose to attach it with a silicone band or double-sided tape.
*The Sheet itself is compatible with Quest 2, 3, 3S. The only difference is the strap.
Please see the documentation for more details.
| Battery capacity |
900mAh |
| Continuous operating time |
Approx. 10 hours (built-in battery) |
| Charging time |
Approximately 2 hours (when power is off) |
| How to charge |
USB Type-C connector |
| Hand Tracking |
Bend each finger
*When using OSC parameters, it is possible to obtain independent movement of each segment.
*Independent movement of the first joint (the joint closest to the fingertip) cannot be captured (such as a pose with the fingernail raised).
*Independent movement of the second and third joints can be captured.
*In index emulation mode, independent joint movements cannot be obtained.
|
| Wireless Communication |
Proprietary communication using the 2.4GHz band (dedicated dongle)
|
| On-board sensors |
Multi-electrode capacitance sensor, pressure sensor
*Please note that due to the sensor's principles, calibration may need to be performed more frequently if your palms sweat a lot.
|
| Supported Streaming Software |
VirtualDesktop*, AirLink*, QuestLink*
SteamLink※
*
No avatar setup required (index controller emulation)
|
| Compatible Applications |
When using VirtualDesktop/AirLink/QuestLink/SteamLink
VRChat, Resonite, Cluster, VirtualMotionCapture, and other SteamVR applications (using Index controller emulation or OSC)
* Operation is not guaranteed with all software.
Standalone Mode
There is no need to connect the PC to the HMD, but you must run DivingStation on a PC connected to the same network as the HMD. (OSC required)
*When using in standalone mode, the PC does not need to be a high-end model for gaming. It is fine as long as it has general processing power and can run DivingStation.
|
| OSC parameters |
Full version 177bit
Lite version 107bit
*Avatar setup is automated.
*The number of parameters consumed is a guideline. It may change depending on future development.
Click here for more details.
|
Shipping time
This product is a pre-order product.
Product shipments are scheduled for early March 2025.
*If a delay in shipping is foreseen, we will immediately notify purchasers via email.
*If you purchase multiple products at the same time, the products will be shipped together with the product that has the latest delivery date. Please be aware of this in advance.
*If you would like to change the shipping address or type of strap after placing your order, please contact us using the inquiry form .
Warranty Information
The warranty is valid for one year from the date of shipment of the product.
We will repair or replace the product free of charge for defects caused by our design and manufacturing, or defects that are considered to have occurred due to our negligence. In accordance with the contents of the warranty policy, we may charge you for repairs for defects or damage that are considered to have occurred due to the user's negligence.
