Diver-X Store
ContactGlove2 + Magnetra2
ContactGlove2 + Magnetra2
Couldn't load pickup availability
JAN: DXP_CG2_LR_withMag2
[About ContactGlove/Magnetra]
ContactGlove is a glove-type VR controller equipped with haptic feedback.
You can input buttons just like with existing VR controllers, and the highly accurate hand tracking and haptic feedback (Haptic® Reactor) allow you to enjoy a more immersive VR experience. ContactGlove1/2 works with all existing SteamVR content.
By combining it with Magnetra, an exoskeleton controller module, you can achieve both a high level of immersion and operability while keeping your hands free.
ContactGlove1 was recognized as an innovative product in the virtual reality field at CES 2023.
https://www.ces.tech/innovation-awards/honorees.aspx
This is the successor to ContactGlove 1. The main changes are as follows:
- Supports finger spreading tracking. Overall hand tracking performance has been improved, including bending motions.
- Significantly improved fit. The glove fabric is now more flexible and the fingertips can now be exposed.
- Significantly improved operability. Physical trigger support by Magnetra2 and increased number of buttons.
If you are considering using this for Vtuber activities, studios, research purposes, or for business or school use, please check here .
Contents
ContactGlove2
- ContactGlove2 (for both hands)
- Communication USB dongle
- Universal mounting adapter (for vive tracker + tundra tracker)
- Carrying Case
- DivingStation ( download )
Magnetra2
- Magnetra2 (for both hands)
- TRRS cables for connection (for both hands)
- Fixing screws: 4 in total (for both hands)
About size (ContactGlove2)
Please refer to the size sheet (PDF) to select your size. Please note that we cannot accept returns due to incorrect size. (You can change the size later by purchasing a replacement glove of a different size separately.)
About size (Magnetra2)
Magnetra2 has a built-in position adjustment mechanism that allows it to be attached to all existing ContactGlove2s in S/M/L sizes and fine-tune the panel position.
Specifications
| Battery capacity | 1,400mAh |
| Continuous operating time | Approx. 8.5 hours (built-in battery) |
| Charging time | Approximately 3 hours (when power is off) |
| How to charge | USB Type-C connector |
| Hand Tracking | Acquisition of independent bending and opening movements of each finger and each joint |
| Haptic feedback |
Haptic Reactor installed in the main body
|
| Wireless Communication | Proprietary communication using the 2.4GHz band (requires connection of the included dongle) |
| Controller Input |
Trigger, Grip, Trackpad Press (Emulation) You need to connect Magnetra2 to use the A, B, system, physical triggers, joystick, and trackpad buttons (up and down). *When performing strenuous movements, please remove Magnetra2. |
| Compatible VR headsets | SteamVR compatible headsets * Operation with all headsets is not guaranteed. |
| Compatible Applications |
VRChat, Resonite, and other SteamVR applications. *We do not guarantee operation with all SteamVR applications.
|
| tracking | Various trackers compatible with the LightHouse tracking system must be installed separately. |
Please check here for detailed product specifications.
Delivery time
This product is a pre-order product.
Product shipments are scheduled for mid-December 2024 (11th-20th).
*If a delay in shipping is foreseen, we will immediately notify purchasers via email.
*If you purchase multiple products at the same time, the products will be shipped together with the product that has the latest delivery date. Please be aware of this in advance.
About the LightHouse Tracking System
You will need to obtain the position of the ContactGlove using the following two devices that are compatible with the LightHouse tracking system.
If you do not have the following devices, please purchase them separately.
・SteamVR Base Station 2.0 (1.0)
- 2 compatible trackers (Tundra Tracker, VIVE Tracker (3.0), VIVE Tracker 2018, etc.)
*An adapter for compatible trackers is included with this product.
*The above two devices are third-party products. Please refer to the product pages for various devices and compatible HMDs before using them.
* When using a non-LightHouse compatible HMD (Quest2, etc.) under the above environment
You need to install OpenVR-SpaceCalibrator (external link) into SteamVR and align the space of the LightHouse tracking system with the space of the HMD.
Warranty Information
The warranty is valid for one year from the date of shipment of the product.
We will repair or replace the product free of charge for defects caused by our design and manufacturing, or defects that are considered to have occurred due to our negligence. In accordance with the contents of the warranty policy, we may charge you for repairs for defects or damage that are considered to have occurred due to the user's negligence.
*Product images are for illustrative purposes only. Appearance may differ from the final product.
*HAPTIK® REACTOR is a trademark of Alps Alpine Co., Ltd.
Share
