JAN: DXP_CG2_LR_withMag2
・Please be sure to read our Document before using the product.
・If you are considering using this for Vtuber activities, studios, research purposes, or for business or school use, please check here .
[About ContactGlove2/Magnetra2]
ContactGlove2 is a glove-type VR controller equipped with haptic feedback.
You can input buttons just like with existing VR controllers, and you can enjoy a more immersive VR experience with high-precision hand tracking and haptic (Haptic® Reactor) feedback. ContactGlove2 works with all existing SteamVR content.
Magnetra2 is an upgrade module that can greatly improve the operability of ContactGlove2. It is an exoskeleton-type controller module that connects to the expansion terminal of the main body and is fixed to the glove using the included screws.
The module maintains the immersive feel of the glove while providing the following benefits:
High operability: Allows for precise movements and provides a more natural feel.
Free Hands: The hinge has a notch that can be rotated to free your hands when needed.
By combining this exoskeleton controller module with Magnetra2, you can achieve both a high level of immersion and operability while keeping your hands free.
Contents
ContactGlove2
- ContactGlove2 (for both hands)
- Communication USB dongle
- Universal mounting adapter (for vive tracker + tundra tracker)
- (For expansion terminal cover) Screwdriver (+)
- Carrying Case
- DivingStation ( download )
Magnetra2
- Magnetra2 (for both hands)
- TRRS cables for connection (for both hands)
- Fixing screws: 4 in total (for both hands)
About size (ContactGlove2)
※February 7, 2025: The size chart has been updated.
Please refer to the size sheet (PDF) to select your size. Please note that returns due to incorrect size are not accepted. *Only the specified sensor size and glove size combination is compatible with each size S/M/L.
(Size changes are possible after purchase. For details, please refer to the Replacement Guide in the image on this page.)
About size (Magnetra2)
Magnetra2 has a built-in position adjustment mechanism that allows it to be attached to all existing ContactGlove2s in S/M/L sizes and fine-tune the panel position.
Specifications
|
Battery capacity
|
1,400mAh
|
|
Continuous operating time
|
Approx. 8.5 hours (built-in battery)
|
|
Charging time
|
Approximately 3 hours (when power is off)
|
|
How to charge
|
USB Type-C connector
|
|
Hand Tracking
|
Acquisition of independent bending and opening movements of each finger and each joint
|
|
Haptic feedback
|
Haptic Reactor installed in the main body
|
|
Wireless Communication
|
Proprietary communication using the 2.4GHz band (requires connection of the included dongle)
|
|
Controller Input
|
Trigger, Grip, Trackpad Press (Emulation)
You need to connect Magnetra2 to use the A, B, system, physical triggers, joystick, and trackpad buttons (up and down).
*When performing strenuous movements, please remove Magnetra2.
|
|
Compatible VR headsets
|
SteamVR compatible headsets * Operation with all headsets is not guaranteed.
|
|
Compatible Applications
|
VRChat, Resonite, and other SteamVR applications. *We do not guarantee operation with all SteamVR applications.
|
|
tracking
|
Two separate trackers are required to be installed to support various tracking systems.
|
Please check here for detailed product specifications.
When using a VR controller
When using this product as a VR controller, a tracker is required to obtain hand position information.
Please check which trackers and related devices are compatible with the tracking system you wish to use and purchase them separately.
*The tracker and related devices are third-party products.
*Please refer to the product pages for various devices and compatible HMDs before using this product.
[For Lighthouse / SteamVR Tracking (2.0)]
・SteamVR Base Station 2.0 (1.0)
- 2 compatible trackers (Tundra Tracker, VIVE Tracker (3.0))
*VIVE Tracker (2018) can be attached, but is not recommended.
[(VIVE) 6DoF inside-out tracking]
- 2 compatible trackers (VIVE Tracker (Ultimate))
*An adapter for compatible trackers is included with this product.
(The mount for VIVE Tracker (Ultimate) must be purchased separately ( product page ) )
* When using an HMD with a different tracking system (Quest 2/3, etc.) in the above environment
OpenVR-SpaceCalibrator (external link) needs to be installed into SteamVR and the space of each tracking system needs to be aligned with the space of the HMD.
Shipping time
This product is a pre-order product.
Product shipments are scheduled for late March 2025.
*If a delay in shipping is foreseen, we will immediately notify purchasers via email.
*If you purchase multiple products at the same time, the products will be shipped together with the product that has the latest delivery date. Please be aware of this in advance.
Warranty Information
The warranty is valid for one year from the date of shipment of the product.
We will repair or replace the product free of charge for defects caused by our design and manufacturing, or defects that are considered to have occurred due to our negligence. In accordance with the contents of the warranty policy, we may charge you for repairs for defects or damage that are considered to have occurred due to the user's negligence.
*Product images are for illustrative purposes only. The appearance of the final product may differ.
*HAPTIC®is a trademark of Alps Alpine Co., Ltd.
